当通过阀门的压降为管路压力的20%左右时，美国克雷恩截止阀就能够高效应用在频繁操作和节流的应用场合。如果节流较小，将因此产生更高的压降将可能导致空穴现象或超快流速，从而导致噪音太高，振动剧烈，可能损坏阀门或相邻的管路。这些截止阀可配置备选执行机构和广泛的阀内件，以满足实际应用要求。
　　Crane globe valves are highly efficient for services requiring frequent operation and throttling when pressure drop across the valve is about 20% of inlet pressure. Closer throttling, creating higher pressure drops may cause cavitation or excessive velocities which could cause high noise levels, vibration and possible damage to the valve or adjacent piping. Globe valves can be equipped with optional operators and are available with a variety of trims to match service requirements.

1. 阀体：阀体为铸件，在关键点上通过重型型钢加以强化，能够承受更大的应力。这些阀门都可配置法兰连接端口和对焊连接端口，都符合ASME标准。
   Body: Body is cast with heavy sections reinforced at points subjected to the greatest stress. Valves are available in both flanged and butt welding ends. All conform to ASME specifications.
2. 阀盖
   Bonnet
3. 阀座环
   Seat Ring
4. 阀瓣
   Disc
5. 阀瓣阀杆螺母：阀瓣阀杆环将阀瓣连接到阀杆上，使得阀瓣能够旋转，并有助于保证阀座地紧密密封和无故障运行。
   Disc Stem Nut: Disc Stem Ring connects the disc to the stem, permitting the disc to swivel and aid in securing tight seating for trouble-free service.
6. 阀瓣垫圈
   Disc Washer
7. 阀杆：阀杆与轭架有很长的啮合段，有助于阀座密封的精确对准。
   Stem: Stem has long engagement with yoke bushing for accurate seating.
8. 阀盖衬套
   Bonnet Bushing
9. 轭架衬套
   Yoke Bushing
10. 轮螺母
    Wheel Nut
11. 填料
    Packing
12. 压盖：压盖是两件式球形结构，将压力均匀地施加在填料上，不会造成阀杆弯曲。
    Gland: Gland is a two-piece, ball-type which exerts even pressure on the packing without binding the stem.
13. 压盖法兰
    Gland Flange
14. 压盖有眼螺栓：有眼螺栓能够安全地紧固阀盖，也可以旋转拆卸，便于方便容易地进入填料函。
    Gland Eye Bolts: Eye bolts are securely fastened to the bonnet yet swing away to permit easy access to the stuffing box.
15. 阀盖垫圈：阀盖垫圈提供积极地密封，有助于防止泄露。压力等级Class 150和300的阀门配置外螺纹/内螺纹阀盖连接。压力等级Class 600需要采用一个环形垫圈 。
    Bonnet Gasket: Bonnet gasket provides a positive seal against leakage. Class 150 and 300 valves have a male/female bonnet joint. A ring-type gasket is employed in Class 600.
16. 阀盖柱头螺栓
    Bonnet Studs
17. 阀盖螺母
    Bonnet Nuts
18. 销钉
    Pin
19. 手轮
    Handwheel