如果要订购，只需从下列信息中选择所需的代码组成完整的型号即可。下面有订购范例供用户参考。
To order, simply complete the valve order code
from information shown. An ordering example is shown for your reference.
阀门类型
Valve Style
选择下列阀门类型代码：
Give valve style code as follows:
KGY = Y形或侧面刀闸阀
KGY = Y or Lateral Knife Gate Valve |
阀门通径
Valve Size
从下列选项中选择所需的通径代码：
Give size code as follows:
2
3
4
5
6
8
10 |
= 2" (DN50)
= 3" (DN80)
= 4" (DN100)
= 5" (DN125)
= 6" (DN150)
= 8" (DN200)
= 10" (DN250) |
|
12
14
16
18
20
24 |
= 12" (DN300)
= 14" (DN350)
= 16" (DN400)
= 18" (DN450)
= 20" (DN500)
= 24" (DN600) |
|
阀体类型
Body Style
从下列选项中选择所需的阀体类型代码：
Give body style code as follows:
| GV |
= |
通用（常用）应用环境阀门
（碳钢涂层填料密封装置/电镀紧固件与碳钢轭架/电镀紧固件）
General
Service Valve
(Coated Carbon Steel Packing Gland/Plated Fasteners with Carbon
Steel Yoke/Plated Fasteners) |
| MV |
= |
比较严酷的应用环境阀门
（不锈钢填料密封装置/电镀紧固件与碳钢轭架/电镀紧固件）
Moderate
Service Valve
(Stainless Steel Packing Gland/Fasteners with Carbon Steel Yoke/Plated
Fasteners) |
| SV |
= |
严酷/腐蚀性应用环境阀门
（不锈钢填料密封装置/电镀紧固件与不锈钢轭架/紧固件）
Severe/Corrosive
Service Valve
(Stainless Steel Packing Gland/Fasteners with Stainless Steel
Yoke/Fasteners) |
|
连接方式
End Connections
从下列选项中选择所需的连接方式代码：
Give end connection code as follows:
| F1R |
= 法兰ANSI 150可更换
= Flanged ANSI 150 Replaceable |
| F1I |
= 法兰ANSI 150整体结构
= Flanged ANSI 150 Integral |
|
出口
Outlets
从下列选项中选择所需的出口代码：
Give outlets code as follows:
| 2 |
= 2个出口
= 2 Outlets |
| 3 |
= 3个出口（仅限于W）
= 3 Outlets (W only) |
| 4 |
= 4个出口（仅限于W）
= 4 Outlets (W only) |
|
阀体衬垫材质
Body Liner Material
从下列选项中选择所需的阀体衬垫代码：
Give body liner material code as follows:
| S1 |
= 304不锈钢
= 304 Stainless Steel |
| S2 |
= 316不锈钢
= 316 Stainless Steel |
| S3 |
= 317不锈钢
= 317 Stainless Steel |
|
| |
订购范例：
Ordering Examples:
KGY,8,L30,F1R,3,S1,ZJ,S1-CR*Actuator
KGY,8,GV-W90-F1R,3S2,MSP,S2-M*Actuator |
|
|
填料材质
Packing Material
从下列选项中选择所需的填料材质代码：
Give packing material code as follows:
所有填料系统（除了HTP, HMP, MSP和FGP以外）都与玻璃纤维填充的聚四氟乙烯PTFE防推出环一起提供。高温填料系统（HPT）则配置碳石墨合成纤维防推出密封环。FGP,
MSP和HMP在填料系统选项中没有防推出密封环。
All packing systems (except HTP, HMP, MSP
and FGP) come with glass filled PTFE anti-extrusion ring. High temperature
packing system (HTP) has carbon graphite fiber composite anti-extrusion
ring. FGP, MSP and HMP options do not have an anti-extrusion ring
in packing system.
标准配置的填料
Standard Packing |
| SMP |
= 比较严酷的应用环境下的填料，温度最高为260oC
= Standard Moderate Service Packing to
500oF (260oC |
| MSP |
= 标准通用应用环境，温度最高为260oC
= Standard General Service Packing to
500oF (260oC) |
备选填料
Optional Packing |
| ASP |
= 严酷应用环境，带Aflas橡胶芯，温度最高为204oC
= Severe Service with Aflas Rubber Cord
to 400oF (204oC) |
| TDP |
= 干燥应用环境，带聚四氟乙烯芯，温度最高为260oC
= Dry Service with PTFE Code to 500oF
(260oC) |
| HTP |
= 高温编制填料，温度最高为343oC
= High Temperature Braided Packing to
650oF (343oC) |
| HMP |
= 高温编制填料，带金属平板，温度最高为540oC
= High Temperature Braided Packing with
Metal Scraper to 1000oF (540oC) |
| FGP |
= 食品级填料，温度最高为233oC
= Food Grade Packing to 450oF
(233oC) |
|
注：
Note: |
阀门选型的考虑因素之一是填料或阀座的最高温度限制。
The limiting factor in valve selection is the
lowest temperature limit of the packing or seat. |
闸板材质
Gate Material
从下列选项中选择所需的闸板材质代码：
Give gate material code as follows:
| S1 |
= 304不锈钢（对于GV和MV型号和S1阀体的刀闸阀是标准配置）
= 304 Stainless Steel (Standard for GV
and MV models and S1 body) |
| S2 |
= 316不锈钢（对于S2阀体的MV和SV型号的刀闸阀是标准配置）
= 316 Stainless Steel (Standard for MV
and SV models with S2 body) |
| S3 |
= 317不锈钢（对于S3阀体的SV型号刀闸阀是标准配置）
= 317 Stainless Steel (Standard for SV
model with S3 body) |
非标准配置
Non-standard |
| S6 |
= 254 SMO不锈钢（仅限于SV型号和S6阀体的刀闸阀）
= 254 SMO Stainless Steel (SV model and
S6 body only) |
| AA |
= 合金20（仅限于SV型号和AA阀体）
= Alloy 20 (SV model and AA body only) |
| HC |
= 哈司特镍合金C（仅限于SV型号和阀体的刀闸阀）
= Hastelloy C (SV model and body only) |
| S5 |
= 硬化17-4 PH不锈钢
= Hardened 17-4 PH Stainless Steel |
| S8 |
= 420系列不锈钢
= 420 Series Stainless Steel |
|
阀座材质
Seat Material
从下列选项中选择阀座材质代码：
Give seat material code as follows:
标准
Standard |
| M |
= 一体化金属阀座（与阀体材质相同）
= Integral Metal Seat (same as body material) |
| V |
= V形流道金属阀座
= V-Orifice Metal Seat |
| CR |
= 氯丁二烯，最高温度为82oC
= Chloroprene to 180oF (82oC) |
| NBR |
= 丙烯腈-丁二烯，最高温度为82oC
= Acrylonitrile-Butadiene to 180oF
(82oC) |
| CSM |
= 氯磺化聚乙烯，最高温度为93oC
= Chloro-Sulfonyl-Polyethylene to 200oF
(93oC) |
| EPDM |
= 三元乙丙橡胶，最高温度为121oC
= Terpolymer of Ethylene, Propylene and
a Diene to 250oF (121oC) |
备选阀座材质
Optional Seats |
| FKM |
= 氟橡胶，最高温度为204oC
= Fluoro Rubber to 400oF (204oC) |
| CRW |
= 去白氯丁二烯，最高温度为60oC（仅限于作为SMP填料）
=
Chloroprene, Off-White to 140oF (60oC)
(Use with SMP packing only) |
| S5D |
= 17-4 PH硬化阀座，可替代Drop-in
= 17-4 PH Hardened Seat, Replaceable Drop-in |
|
注：
Note: |
阀门选型的考虑因素之一是填料或阀座的最高温度限制。请参阅DeZurik（德朱瑞克）公司的弹性材料推荐材质选型指南软件。
The limiting factor in valve selection is the
lowest temperature limit of the packing or seat. See DeZurik Material
Selection Guide software for elastomer recommendations. |
标准被选项
Standard Options
从下列选项中进行选择：
Give options as follows:
| PSA |
= 在阀座区域内的净化清洗端口
= Purge Ports in Seat Area |
| PCA |
= 在阀腔内的净化清洗端口
= Purge Ports in Chest Area |
| PSC |
= 在阀座和阀腔内的净化清洗端口
= Purge Ports in Seat and Chest Area |
| CRT |
= 根据QY00006的认证物理化学检测报告
= Certified Physical and Chemical Test
Report per QY00006 |
|
|
