阀门类型
Valve Style
选择下列阀门类型代码：
Give valve style code as follows:
KGU = 氨基甲酸乙酯刀闸阀
KGU = Urethane Knife Gate Valves
注：氨基甲酸乙酯的温度限制范围为-40o to 82oC
Note: Temperature limits of Urethane are -40o
to 180oF (-40o to 82oC) |
阀门通径
Valve Size
从下列选项中选择所需的通径代码：
Give size code as follows:
4
6
8
10
12 |
= 4" (DN100)
= 6" (DN150)
= 8" (DN200)
= 10" (DN250)
= 12" (DN300) |
|
14
16
18
20
24 |
= 14" (DN350)
= 16" (DN400)
= 18" (DN450)
= 20" (DN500)
= 24" (DN600) |
|
|
|
连接方式
End Connections
从下列选项中选择所需的连接方式代码：
Give end connection code as follows:
| W1 |
= |
对夹，ANSI 150
Wafer, ANSI 150 |
| W110 |
= |
对夹，ISO 7005-/PN 10和7500-2/PN 16, DIN 10或BS4504/PN10
Wafer, ISO 7005-/PN 10 and 7500-2/PN16,
DIN 10 or BS4504/PN10 |
| W116 |
= |
对夹，ISO 7005-/PN 10和7500-2/PN 16, DIN 16或BS4504/PN16
Wafer, ISO 7005-/PN 10 and 7500-2/PN16,
DIN 16 or BS4504/PN16
不提供DN200, DN450, DN500和DN600阀门
Not available on 8, 18, 20 and 24"
(DN200, DN450, DN500 and DN600 valves) |
| W1J1 |
= |
对夹，JIS 10（不提供DN200）
Wafer, JIS10 (Not available on 8"
(DN200)) |
| W1DA |
= |
对夹，AS2129表D
Wafer, AS2129 Table D |
| W1EA |
= |
对夹，AS2129表E
Wafer, AS2129 Table E |
| W1T |
= |
对夹，ANSI 150带贯穿螺栓法兰
Wafer, ANSI 150 with through bolting flange |
|
闸板材质
Gate Material
从下列选项中选择所需的闸板材质代码：
Give gate material code as follows:
| S1 |
= 340不锈钢（对于S1阀体的GV和MV型号的阀门是标准配置）
= 304 Stainless Steel (Standard for GV
and MV models and S1 body) |
| S2 |
= 316不锈钢（对于S2阀体的MV和SV型号阀门是标准配置）
= 316 Stainless Steel (Standard for MV
and SV models with S2 body) |
|
填料材质
Packing Material
从下列选项中选择所需的填料材质代码：
Give packing material code as follows:
| C |
= |
方形编制聚四氟乙烯内注人造纤维，最高温度为260oC
Square braided PTPE Impregnated Synthetic
Fiber to 500oF (260oC) |
|
| |
订购范例：
Ordering Examples:
KGU,4,W1,S2,C*MN-HD8 |
|
