服务是我们的天职 Service Is Our Business
|
||
福建省厦门市建设大厦2509单元 邮编:361001 电话:592-2121956 传真:592-2122287 E-mail: 666@h6688.com |
首页Home>美国尼伯科电动执行机构Electric Actuator >正文Text |
【下一页Next】
|
美国尼伯科500系列电动执行机构(1) Series 500 Electric Actuators(1) |
美国尼伯科有限公司 |
THE ELECTRIC SOLUTION 500系列电动执行机构适用于需要全部扭矩和运转速度的中间值的场合。 NIBCO Series 500, quality, line of electric actuators are designed for quarter-turn applications — ball, butterfly and plug valves; dampers; vents and similar uses. NIBCO Actuators are manufactured in a wide range of output torque and operating speeds to fit your specific requirements. The Series 500 actuators are designed for the entire mid-range of torques and operating speeds.
STANDARD FEATURES · Heater and thermostat installed in all units · 表面硬化钢正齿轮联动装置永久润滑 · Case hardened steel spur gear train is permanently lubricated · 表面硬化钢驱动轴 · Case hardened steel drive shaft · 工作温度:-40oC时启动标准配置加热器,至60oC · Operating temperatures: -40° F with standard heater activated, to +140° F · 单相电容运转电机配置热过载保护 · Single phase capacitor run motor with thermal overload protection. · 外壳保护国际电气制造业协会NEMA 4认证 · Enclosure certified to Nema 4 · 分离式手动过载操作,带位置指示器 · Declutchable manual override with position indicator · 两个机械式管道进口 · Dual machined conduit entrances · 外壳配置吸附式开槽六角螺栓 · Captive slotted hex bolts on enclosure · 可选择在任何方向安装 · Operational in any mounting orientation · 配置可调节凸轮的单刀双掷行程微开关 · Two single pole double throw end of travel micro switches with adjustable cams · 阴螺纹DIN/ISO F07输出驱动和F07/F10螺栓模式 · Female DIN/ISO F07 output drive and F07/F10 bolt pattern · 重量:17至18磅 · Weight: 17 to 18 lbs |
OPTIONAL FEATURES · 机电制动器 |
500系列 SERIES 500 | ||||||||
扭矩 TORQUE | 速度90o SPEED 90o |
型号 MODEL |
锁定转子电流安培 LOCKED ROTOR AMP | 电机负载循环 MOTOR DUTY CYCLE |
||||
IN/IB | 牛顿·米 NM |
115伏交流电 115VAC |
220伏交流电 220VAC |
12伏直流电 12VDC |
24伏直流电 24VDC |
|||
700 | 79 | 10秒 10 SEC | 500-10-4 | 0.67 | 0.34 | 4.3A | 5.0A | 广Extended |
1600 | 181 | 30秒 30 SEC | 500-30-4 | 0.35 | 0.43 | 4.3A | 5.0A | 广Extended |
首页Home>美国尼伯科电动执行机构Electric Actuator >正文Text |
【下一页Next】
|