消防(防火)阀门 • 可钻孔或攻丝用于球滴出口 •
三元乙丙橡胶密封 • 青铜阀座 • 不锈钢阀瓣和弹簧驱动
Fire Protection Valve • Drilled & Tapped
for Ball Drip Outlet •
EPDM Seal • Bronze Seat • Stainless Steel Disc & Spring
Actuated
250 PSI / 17.2 Bar非冲击性冷水
250 PSI/17.2 Bar Non-Shock Cold Water
开槽符合ANSI / AWWA C-606钢管标准 •
UL / ULC认证 • FMRC认证 •
纽约市MEA 258-93-E认证
GROOVES CONFORM TO ANSI AWWA C-606 FOR STEEL PIPE
•
UL/ULC LISTED • FMRC APPROVED •
APPROVED BY THE NEW YORK CITY MEA 258-93-E
|
部件
PART |
规格说明
SPECIFICATION |
*1. |
阀体
Valve Body |
灰铁,ASTM A 48,30A级
Gray Iron, ASTM A 48 Class 30A |
2. |
阀座
Seat |
青铜C83600或C93200, ASTM B 505
Bronze C83600 or C93200, ASTM B 505 |
3. |
单向阀瓣
Clapper |
不锈钢304, ASTM A 240
Stainless Steel 304, ASTM A 240 |
**4. |
端面密封
Facing Seal |
三元乙丙橡胶
EPDM Rubber |
5. |
压环
Clamping Ring |
不锈钢304, ASTM A 240
Stainless Steel 304, ASTM A 240 |
**6. |
垫圈
Gasket |
三元乙丙橡胶
EPDM Rubber |
7. |
弹簧
Spring |
不锈钢302, ASTM A 313
Stainless Steel 302, ASTM A 313 |
8. |
铰销
Hinge Pin |
不锈钢303, ASTM A 582
Stainless Steel 303, ASTM A 582 |
9. |
螺栓
Bolt |
不锈钢304, ASTM F 593
Stainless Steel 304, ASTM F 593 |
**10. |
防松螺母
Locknut |
不锈钢303, ASTM F 594
Stainless Steel 303, ASTM F 594 |
11. |
插塞DN8 NPT
Plug 1/8" NPT |
钢
Steel |
12. |
插塞DN15 NPT
Plug 1/2" NPT |
钢
Steel |
* 不能现场更换。
** 更换密封组件。
* Not field replaceable.
** Replacement seal kit. |
|
尺寸 - 重量 DIMENSIONS—WEIGHTS |
通径 Size |
尺寸 Dimensions |
重量 Weight |
A |
英寸 In. |
毫米 mm. |
英寸 In. |
毫米 mm. |
磅 Lbs. |
公斤 Kg. |
21/2 |
65 |
7.03 |
179 |
9 |
4 |
3 |
80 |
7.62 |
194 |
11 |
5 |
4 |
100 |
8.44 |
214 |
17 |
8 |
6 |
150 |
10.25 |
260 |
38 |
17 |
|
G-917-W
槽状连接
Grooved
G-917-W
球滴
Ball Drip
美国尼伯科UL认证的止回阀可配置一个自动化球滴。这个球滴安装在消防部分连接的止回阀的轮箍C位置上。出现压力时,止回阀将关闭,但是压力消失后将开启使得谁能够从消防连接处排泄。
An automatic ball drip is available for
NIBCO Underwriter's check valves. The ball drip is installed at
boss location "C" on the check valve of the fire department
connection. It will close against pressure, but will open when pressure
is off allowing water to drain from the fire department connection.
DN15球滴型号RG 22000
DN20球滴型号RG 22100
1/2"
Ball Drip # RG 22000
3/4" Ball Drip # RG 22100
|
|