| 
您是否知道？
Did You Know?
- 美国太平洋阀门是一家以“质量第一”为宗旨的工程阀门制造商，已有60多年的历史。而且美国太平洋阀门也是ISO 9001和Six Sigma公司认证的制造商。
Pacific Valves has been a quality-driven manufacturer
of engineered valves for over 60 years. And that Pacific Valves is both
an ISO 9001 and Six Sigma company.
- 美国太平洋阀门从1997年开始制造大口径C12A (P-91)压力密封阀门，现在在全球至少已经安装1200个这样的阀门。
Pacific Valves has manufactured large bore C12A
(P-91) pressure seal valves since 1997 and currently has an installed
base in excess of 1,200 globally.
- 美国太平洋阀门拥有一个售后服务团队，帮助用户处理现场问题和在开机和商业运作后提供技术支持。
Pacific Valves has an Aftermarket Support Team
to assist your site issues and provide technical support during start
up and commercial operation.
- 我们压力密封组装轭架结构使得配置齿轮操作机构和动力执行机构更加容易，是重量更轻，维修更容易。
Our pressure seal fabricated yoke design allows
for ease of adaptation for gear operators and actuation while reducing
weight and increasing serviceability.
- 我们的Y球形截流阀和Y形截止止回阀在降低系统压降方面是行业领导者，因此提高了整个工厂的工作效率。美国太平洋阀门能够降低用户在管道通径的要求。
Our Y-Globe and Y-Stop/Check Valves are an industry
leader in the reduction of system pressure drops thus increasing overall
plant efficiency. Pacific Valves can reduce your pipe size.
- 我们的平行阀瓣闸阀使得热补偿设备成为多余，热补偿设备对于所有扭矩阀座阀门来说是一种成本昂贵的设备，而且我们的这种阀门最大工作温度可超过482oC.
Our Parallel Disc Gate Valves eliminates thermal
compensation devices, a costly requirement associated with all torque-seated
valves, in applications above 900oF.
- 我们所有阀门的后座、阀瓣和阀座环表面都经过硬面处理，使用寿命更长。
The backseat, disc and seat ring seating surfaces
of all of our valves are hardfaced for long service life.
- 我们的翻转式阀瓣止回阀专用于在严酷的应用环境下迅速开启和关闭，避免出现水锤现象。
Our Tilting Disc Check Valves are designed for
quick opening and closing in severe service applications and the elimination
of water hammer.
|
