家用节能柜式电热水器
这些燃气热水器符合或优于美国加利福尼亚州有关标准的要求。

螺口型内浸加热棒

BRADFORD WHITE
Residential Energy Saver Electric-Tabletop
Meets NC Code Requirements
Features:

• High density fiberglass insulation - a thick wall of fiberglass completely covers the sides and top of tank, saving energy by retarding loss of heat.
• Glass-lined tank - this exclusive glass formulation is applied under pressure to completely cover the tank interior for years pf extra service. Protects against rust and corrosion. Will not crack or peel.
• Protective magnesium anode rod - provides added protection against corrosion for long trouble-free service.
• Special intake dip tube - directs incoming cold water to bottom of tank, eliminates mixing of cold water with hot.
• Fully automatic controls - fast acting surface-mount thermostats for automatic temperature control. Factory installed sensitive manual reset energy cutoff for safety to prevent overheating.
• Direct heat transfer with immersed elements - transfers heat directly and efficiently to the water.
• T&P relief valve - factory installed.
• Six or ten year limited warranty on steel tank - heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining.
• Six year limited warranty on parts.

These water heaters meet or exceed the performance standards established under NAECA.

Note: The Tabletop Heaters are built standard to meet North Carolina Code and will be wired inter-locking (non-simultaneous) 240 volt with 4500 watt elements. Require a 30 amp breaker.

General
All models UL listed. All water connections are 3/4" (19mm) NPT. All electrical connections 3/4" (19mm). All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa). Change suffix number "6" to "10" for warranty identification.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

6-Year Limited Warranty on Component Parts
BRADFORD WHITE CORPORATION has a 6-year warranty on replaceable parts - thermostat, elements, dip tube, drain valve. These quality components are manufactured for us by industry leaders and will be replaced in the event of failure during the parts warranty period (exclusive of shipping and re-installation cost.)*

6 or 10-Year Limited Tank Warranties
BRADFORD WHITE CORPORATION LIMITED WARRANTY: Protects your investment in a quality glass-lined water heater. If the tank leaks for reasons of faulty materials, workmanship, or corrosion within the warranty period, the heater will be replaced with a comparable heater of our manufacture (exclusive of shipping and re-installation cost.)*

* Some states do not allow limitations on warranties. For products installed in USA, Canada and Puerto Rico. See complete copy of the warranty included with the heater.