RESIDENTIAL GAS SELF-CLEANING
12-Year Tank Warranty　　12-Year Parts Warranty

• Fused Ceramic Shield^TM
  A tough, thick durable coat of blue cobalt at ceramic is fused to the tank's interior surfaces at 1600^oF, forming a corrosion-resistant lining for years of dependable protection and use.
• Patented Delimer Dip Tube
  Carries cold inlet water deep into the tank to minimize temperature dilution of hot water. Minimizes sediment and lime build-up that lead to tank failure. Not shipped on 75 gallon model.
• Non-CFC Foam Insulation
  The tank is surrounded by a thick coat of non-CFC polyurethane foam to trap heat inside the tank, saving energy.
• Piezo Electric Igniter
  For lighting the pilot without matches.
• T&P Valve
  Conveniently located on the side of the tank to facilitate piping to a drain or external to the building. Also available with top T&P opening for field-installed top T&P valve.
• 3/4" Top Water Connections
• 1/2" Gas Connection
• Aluminized Steel Multiport Burner
  For even flame distribution, quiet operation and high-efficiency combustion. Propane models feature cast iron burners.
• Combination Thermostat/ECO
  With factory-preset pressure regulator and built-in millivolt-powered energy cut-off for overheat protection.
• Anode Rod
  Top-mounted, extra heavy-duty anode for added tank protection, extending the life of the tank.
• Code Approvals
  AGA certified, CEC and 1990 NAECA approved. All models are certified at 300 PSI test pressure and 150 PSI working pressure.
• Brass Drain Valve

When top T&P is ordered, the anode is moved to the rear location and te front anode location is used for the field-installed T&P valve.

Delete "V" in model number for top T&P option, T&P opening on top of the heater with the valve shipped in the box for field installation. For propane, substitute "P" for "N" in model numbers. Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. Dimensions on all charts shown in inches. Inlet and outlet are on 8" centers on 40- and 50-gallon models and 11" centers on the 75-gallon models. All models have 3/4" top water connections except 75T75 which has 1" top water connections. 3/4" side space heating connections on 40T60, 50T63 and 75T75 only. +LimeFighter^TM not provided on 75-gallon model.

SPECIFICATION
Residential gas water heater(s) shall be model ________________ as manufactured by American Water Heater Company, or an approved equal, and shall have a ________________-year tank warranty and a ________________-year parts warranty, when installed in a residential application. When installed in a commercial application, the unit will have a 1-year tank warranty and a 1-year parts warranty. Heater(s) shall have a storage capacity of ______ gallons and shall have a rated input of ______ BTU's, and shall be design certified, tested and listed in accordance with American Gas Association Standards and ANSI Z21 10. Heaters shall meet or exceed the requirements of the Federal "National Appliance Energy Conservation Act of 1987." The interior of the storage tank shall be lined with a Fused Ceramic Shield^TM lining, fused to the tank at 1600^oF, forming a corrosion-resistant lining; polymer linings are not acceptable. Each tank shall be funished with an internal anode for anodic protection. The unit must be equipped with a combination gas control thermostat and non-reset type ECO. A corrosion-resistant drain valve shall be provided on the front of each unit. The tank shall be totally encased in a steel jacket painted and insulated with a non-CFC foam to reduce stand-by heat loss. The tank must be design certified for 300 PSI test pressure and 150 working pressure. The unit must be equipped with a piezo electric igniter for lighting the pilot without matches.