材料
MATERIALS
组合柜 — 18-8 S、高强度340不锈钢。全焊接结构。
Cabinet — 18-8 S, type-304, heavy-gauge (0.8mm) stainless steel. All-welded construction.
法兰 — 18-8 S、22-gauge（厚度0.8mm）340不锈钢，缎面（拉丝）表面。拉制一件式无缝结构。
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn one-piece, seamless construction.
门 — 18-8 S、18-gauge（厚度1.2mm）340不锈钢。14mm直角回转边缘，更加坚固耐用。采用隐蔽式全长度不锈钢钢琴式合页铰链固定在组合柜上。配置不锈钢轴旋转门挡和摩擦止门器。
Door — 18-8 S, type-304, 22-gauge (1.2mm) stainless. 9/16" (14mm) 90° return edges for maximum rigidity. Secured to cabinet with a concealed, full-length stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and friction catch.
纸巾输出装置 — 18-8 S、22-gauge（厚度0.8mm）340不锈钢。容量：300张C形折叠纸巾或400张多层折叠纸巾。
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Capacity: 300 C-fold or 400 multifold paper towels.
垃圾箱 — 可拆卸，防泄漏，坚固耐用的模铸塑料。容量：6.1公升。
Waste Receptacle — Removable, leakproof, rigid molded plastic. Capacity: 1.6-gal. (6.1-L).
备选件：可订购美国保必丽型号369-130 TowelMate®配件作为备选附件。TowelMate附件可以一次输出一张纸而不会出现折皱、松垂、从纸巾输出口掉落的现象。纸巾导轨上的90度直角回转设计可以防止把纸巾门打开进行维修时，纸巾往前掉出。
Optional: Order Bobrick Model No. 369-130 TowelMate® available as an optional accessory. TowelMate accessory allows for paper towels to dispense one at time without bulging or sagging, or falling through the towel tray opening. The 90 degree return on the towel guide prevents papers from falling forward and out when door is opened for servicing.
工作原理
OPERATION
这款纸巾架无需进行调节或采用适配器，即可输出C形折叠纸巾或多层折叠纸巾。通过打开组合柜门并移出垃圾箱，可以对垃圾容器进行维护。组合柜门配置不易察觉的隐蔽式法兰。缆索旋转门挡防止损坏卫生间附件和墙壁。
Paper towel dispenser accommodates C-fold and multifold paper towels without adjustment or use of adapters. Waste receptacle is serviced by opening door and removing waste container. Door conceals flange from view. Cable door-swing limiter prevents damage to washroom accessories and walls.
安装
INSTALLATION
要事先准备好一个290mm x 750mm大小的方形墙开口。最浅嵌墙深度要求是95mm。要保留足够的结构间隙以避免所开的墙孔将墙穿透。要与机械工程师协调避免与管道、排气装置和导管产生冲突。如果本产品安装在装饰材料（如瓷砖等）墙壁上，要提供槽型铝材或其他过滤装置，以消除法兰与墙面之间的缝隙。在把本组合柜安装到墙开口内时，需要在图纸中标注"S"的位置用薄垫片垫在框架和本产品之间，然后再用8号4.2mm x 32mm金属片螺丝（不提供，须另外购置）将本产品固定住。
Provide framed rough wall opening 11-1/2" wide x 29-1/2" high (290 x 750mm). Minimum recessed depth required from finish face of wall is 3-3/4" (95mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount cabinet with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" sheet-metal screws (not furnished).
规格说明
SPECIFICATION
嵌墙式纸巾架和垃圾箱组合柜应该采用304不锈钢材料和全焊接结构。外表应该采用拉丝表面。法兰应该是拉制、一件式、无缝结构。组合柜门应该采用18级（1.2mm厚）不锈钢制作；配置14mm的90度直角回转边缘；采取一个隐蔽的全长度不锈钢钢琴式合页固定在组合柜上，并配置一个不锈钢缆索旋转门挡和摩擦止门器。组合柜门配置不易察觉的隐蔽式法兰。纸巾架应该能够输出300张C形折叠纸巾或400张多层折叠纸巾，无需调整或采用适配器。垃圾箱应该配置可拆卸的、防泄漏、坚固耐用的模铸塑料垃圾容器，其容量为6.1公升。
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction. Exposed surfaces shall have satin finish. Flange shall be drawn, one-piece, seamless construction. Door shall be 18 gauge (1.2mm); have 9/16" (14mm) 90° return edges; be secured to cabinet with a concealed, full-length stainless steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and friction catch. Door conceals flange from view. Paper towel dispenser shall be capable of dispensing 300 C-fold or 400 multifold paper towels without adjustment or use of adapters. Waste receptacle shall be furnished with a removable, leakproof, rigid molded plastic waste-container with a capacity of 1.6-gal. (6.1-L).
嵌墙式纸巾架和垃圾箱组合柜应该是美国保必丽公司型号B-36903产品，生产厂家是美国保必丽卫浴设备有限公司，位于纽约克林顿公园；田纳西州杰克逊市；加利福尼亚州洛杉矶市；美国保必丽卫浴设备公司，位于美国安大略湖斯卡伯勒；保必丽卫浴设备集团有限公司，位于澳大利亚；以及保必丽卫浴设备有限公司，位于英国。
Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-36903 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.