![](im/1119_01s.jpg)
![](im/1119_01l.jpg)
![](im/111901_02s.gif)
![](im/111901_02l.gif)
![](im/111901_03s.gif)
![](im/111901_03l.gif)
材料
MATERIALS
组合柜 — 18-8 S、重型340不锈钢。全焊接结构。
Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction.
门 — 18-8 S、18-gauge(厚度1.2mm)340不锈钢。14mm直角回转,更加坚固耐用。采用隐蔽式全长度不锈钢钢琴式合页铰链固定在组合柜上。配置不锈钢旋转门限制器,以及两个与其他美国保必丽卫生间附件类似的带钥匙杠杆锁。
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. 9/16" (14mm) 90° return for maximum rigidity. Secured to cabinet with a concealed, full-length, stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and two tumbler locks keyed like other Bobrick washroom accessories.
纸巾输出装置 — 18-8 S、22-gauge(厚度0.8mm)340不锈钢,缎面(拉丝)表面。圆形纸巾盒在开口处有镶边,输出纸巾时不会造成纸巾被撕破。容量:600张C形折叠纸巾,或800张多层折叠纸巾,或1100张单层纸巾。
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Rounded towel tray has hemmed opening to dispense paper towel without tearing. Capacity: 600 C-fold, 800 multifold, or 1100 singlefold paper towels.
垃圾容器 — 防漏坚固耐用的模铸塑料。可拆卸用于维护。容量:24公升。
Waste Container — Leak-proof rigid molded plastic. Removable for servicing. Capacity: 6.3-gal. (24.0-L).
工作原理
OPERATION
这款纸巾架可进行调节,即可输出C形折叠纸巾,或多层折叠纸巾,或单层纸巾,不需要采用附加的适配器或纸巾盒。为了对垃圾箱进行维护,使用所提供的钥匙将组合柜门打开,然后拆卸垃圾容器。缆索门旋转限制器能够防止损坏卫生间附件和墙壁。
Paper towel dispenser is adjustable to dispense C-fold, multifold, or singlefold paper towels without use of additional adapters or towel trays. To service waste receptacle, unlock door with key provided and remove waste container. Cable door-swing limiter prevents damage to washroom accessories and walls.
安装
INSTALLATION
要事先准备好一个292mm x 1362mm大小的方形墙开口。最浅嵌墙深度要求是146mm。要保留足够的结构间隙以避免所开的墙孔将墙穿透。要与机械工程师协调避免与管道、排气装置和导管产生冲突。如果本产品安装在装饰材料(如瓷砖等)墙壁上,要提供槽型铝材或其他过滤装置,以消除法兰与墙面之间的缝隙。在把本产品安装到墙开口内时,需要在图纸中标注"S"的位置用薄垫片垫在框架和本产品之间,然后再用8号(4.2 x 32mm)金属片螺丝(厂家不提供,需另行采购)将本产品固定住。
Provide framed rough wall opening 11-1/2'' wide x 53-5/8'' high (292 x 1362mm). Minimum recessed depth required from finish face of wall is 5-3/4'' (146mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount cabinet with shims between framing and cabinet at all points indicated by an S, then secure with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).
规格说明
SPECIFICATION
嵌墙式纸巾架和垃圾箱组合柜应该采用304不锈钢材料和全焊接结构,表面应该采用拉丝表面。组合柜门应该采用18级(1.2mm)304不锈钢,配置14mm直角回转镶边,并采用隐蔽式全长度不锈钢钢琴式合页铰链,配置不锈钢缆索门旋转限制器和两个与其他美国保必丽卫生间附件类似的带钥匙杠杆锁。纸巾输出装置应该能够容纳和输出600张C形折叠纸巾,或800张多层折叠纸巾,或1100张单层纸巾。垃圾箱应该配置一个可拆卸、防漏、坚固耐用的模铸塑料垃圾容器,其容量达24公升。如果需要应该把厂家的维修和配件手册提供给建筑物业主/管理人员。
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish. Door shall be 18 gauge (1.2mm); have 9/16'' (14mm) 90° return edges; be secured to cabinet with a concealed, full-length stainless steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and two tumbler locks keyed like other Bobrick washroom accessories. Paper towel dispenser shall be capable of dispensing 600 C-fold, 800 multifold, or 1100 singlefold paper towels. Waste receptacle shall be furnished with a removable, leak-proof, rigid molded plastic waste-container with a capacity of 6.3-gal. (24.0-L). Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
嵌墙式纸巾架和垃圾箱组合柜应该是美国保必丽公司型号B-3803产品,生产厂家是美国保必丽卫浴设备有限公司,位于纽约克林顿公园;田纳西州杰克逊市;加利福尼亚州洛杉矶市;美国保必丽卫浴设备公司,位于美国安大略湖斯卡伯勒;保必丽卫浴设备集团有限公司,位于澳大利亚;以及保必丽卫浴设备有限公司,位于英国。
Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-3803 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.