好施简介 | 美国洁具 | 美国热水器 | 美国阀门 | 美国泵 | 产品知识
总部网站
商务问答
联系方式
服务是我们的天职  Service Is Our Business
福建省厦门市建设大厦2509单元  邮编:361001  电话:592-2121956  传真:592-2122287  E-mail: 666@h6688.com
首页Home美国尼伯科公司 Nibco IncChemtrol®阀门Chemtrol® Valves >正文Text
下一页Next
  产品指南 - 球阀(4)
Product Guide—Ball Valves (4)

Chemtrol®是
美国尼伯科的商标
聚丙烯Tru-Bloc球阀
True Union黑和Chem-Pure® (天然)
Polypropylene Tru-Bloc Ball Valves
True Union Black and Chem-Pure® (Natural)

22oC温度下压力为150 psi,非冲击性水,全端口(全流道)
150 psi at 73oF water–non-shock–full port

黑聚丙烯
Black Polypropylene

  紫外线会使PP材料严重老化。因此,所有PP管道产品,包括阀门,Chemtrol制造的用于通用化工领域的产品,包含最少2.5%碳黑。由于采用非常高浓度的黑色素,有效地起到掩蔽的作用,因此Chemtrol管道系统可以长期安装在直接暴露在阳光下的地方。
  Ultraviolet radiation produces severe degradation of PP. Therefore, all PP piping products, including valves, which Chemtrol produces for general chemical service, contain a minimum of 2.5% carbon black. By virtue of the masking effect by the unusually high concentration of black pigmentation, a Chemtrol piping system may be installed for long-term service with exposure to direct sunlight.

Chem-Pure (天然)聚丙烯
Chem-Pure (Natural) Polypropylene

  在我们的Chem-Pure管道产品系统中,用来制造所有部件的材料都是PP材料,这是因为PP材料所含的金属成分、天然纯丙烯以外的有机成分和自由离子的含量很低。在塑料树脂内,没有添加颜料或其它掺杂物(天然)。Chem-Pure系统适用于高纯度化工行业或无离子水。
  The PP material utilized to produce all of the components in our Chem-Pure piping products system was selected because of its extremely low content of metals, organic compounds other than naturally pure propylene, and free ions. No pigments or other adulterants (natural) are added to the plastic resin. Chem-Pure systems are intended for high purity chemicals or DI water.

特点
Features

  • 这种阀门问世30多年来,其阀体长度和管套接连接件上的强力改进顶点螺纹始终没有改变。这使得人们可以用新的阀腔更换肮脏的阀门,新旧管接螺母能够互相配合,不需要改变管道长度。
    The laying length of the body and the heavy-duty modified-acme threads in the union connections to the body have not changed in the 30-year history of the valve. This permits fouled valve replacement with a new body cartridge, which will fit the old union nuts. No change in piping length is required.
  • 型号C结构特点,在于阀门两端的TFE阀座,确保阀座后侧周围没有泄漏。在Chemtrol Tru-Bloc关闭阀安装和测试后,连接到满储的储罐的管道开口将不会开始滴漏。
    Model-C design features, under the TFE seats at both ends of the valve, ensure no leakage around the back-side of the seats. Open piping attached to a filled tank will not start to drip-leak following installation and test of a Chemtrol Tru-Bloc shut-off valve.
 
  • 型号C结构,在阀座支架下配置增能器O形环,使得阀门能够根据阀座磨损状况自动进行调整。在工厂组装期间,阀座的封装挤压和阀门测试的调整都是通过机械设备进行操作。一旦安装完毕,手动旋紧的管接螺母就紧压着Chemtrol阀门的密封面。
    Model-C design, with an energizer O-ring beneath the seat-carrier, enables the valve to automatically adjust for seat wear. Adjustments for envelope squeeze on seats and valve testing are done by machine during factory assembly. Upon installation, a hand-tightened union nut serves to compress the face-seal of a Chemtrol valve.
  • 全端口(全流道)结构对流体的阻力最小,因此压降也最小。
    Full port design produces minimum flow restriction with the lowest possible pressure-drop.
  • 这些阀门都是在没有硅酮成分的环境下制造和组装的。
    Valves are manufactured and assembled without exposure to silicone compounds.
  • 特别的红色手柄能够远距离表示“启闭”和流向。手柄上模铸的箭头表示旋转方向,方便操作人员在90o角度范围内进行操作。由于实际应用中可能需要拆卸手柄,因此D形环阀杆平面表示“启闭”,阀杆顶部的的模铸箭头表示流向。
    Distinctive red handle indicates “open/close” and direction of flow at a distance. And molded-in arrows on top of the handle dictate rotational direction to personnel for easy operation within 90o stops. For applications requiring handle removal, the D-ring stem flats indicate “open/close” and a molded-in arrow on top of the stem indicates flow direction.
  • 参阅Chemtrol阀门执行机构指南,选择电动或气动执行机构及附件,包括用于阀门现场安装或工厂组装的塑料外壳和塑料安装组件。
    Refer to the Chemtrol Valve Actuation Guide for full selection of electrical and pneumatic actuators with accessories, including plastic housings and plastic mounting kits for field or factory assembly to valves.

注意:
Notes

  参阅第2页的“部件材料清单”。如果需要了解更多的材料选择,请参阅第1页的“材料”。适用于球阀的“执行机构安装参数”和“备选附件”的完整清单请参阅第21页及以后的内容。这些阀门的“安装和维护指南”内容在第8页。如果需要额定压力-温度的特殊关系,请参阅第33页的“工程技术参数”。如果需要“Chemtrol阀门标准”,请参阅第35页。
  See page 2 for a list of Components and Construction Materials. For more insight into the selection of materials, refer to Materials, page 1. Actuation Mounting Data and a complete listing of Optional Accessories for ball valves begins on page 21. Installation and Maintenance Instructions for these valves appear on page 8. For specific relationships of pressure vs. temperature ratings, refer to Engineering Data, page 33. For Chemtrol Valve Standards, see page 35.

Chemtrol型号
Chemtrol Figure Numbers

 

阀门通径
Valve Sizes
材料
Materials
弹性材料
阀内件
Elastomeric
Trim
端口连接
End Connections
承插
Soc.
螺纹
Thd.
法兰
Flgd.
DN15 - DN100
1/2”– 4”
DN15 - DN100
1/2”– 4”
黑波利普罗聚丙烯纤维
Black Polypro
天然波利普罗聚丙烯纤维
Natural Polypro
FPM (氟化橡胶)
FPM (Viton)
FPM (氟化橡胶)
FPM (Viton)
S61TB-V1
S61TB-V1
S62TB-V2
S62TB-V2
T61TB-V1
T61TB-V1
S62TB-V2
S62TB-V2
F61TB-V1
F61TB-V1
NA2
NA2

1 DN32通径没有法兰连接的型号。
1 Flanged figures are not available in the 1-1/4" size.
2 除了1-1/4" (DN32)通径以外,可以提供下列表格中所有通径范围的承插连接的Chem-Pure (天然PP)阀门。采用螺纹连接件替代承插连接件,则承插连接阀门可以转换为螺纹连接阀门。不提供法兰连接的产品。
2 Socket Chem-Pure (natural PP) Valves are available in the range of sizes shown except for the 1 1/4" size. Socket valves may be converted to threaded by exchanging the socket end connector with a threaded end connector. Flanged figures are not available.

 
尺寸-重量-流量系数
Dimensions–Weights–Flow Coefficients

 

  外形尺寸
Profile
端到端
End-to-End
流量系数
Fluid Flow
Coefficient
阀门
通径
Valve
Size
A1 B C D N P E
螺纹
Thd.
F
承插
Soc.
G
承插
Soc.
H
法兰
Flgd.
大致2
重量(磅)
Approx.2
Wt. Lbs.
Cv3
TU
1/2 1.70 1.94 1.96 0.50 2.98 3.44 4.19 4.19 2.49 6.04 0.32 22
3/4 2.12 2.50 2.41 0.75 3.63 3.82 5.00 5.00 3.05 7.32 0.58 56
1 2.12 2.69 2.76 1.00 4.13 4.20 5.50 5.50 3.30 8.06 0.76 113
1-1/4 2.56 3.74 4.01 1.25 4.70 4.55 6.47 N/A N/A N/A 1.69 180
1-1/2 2.56 3.74 4.01 1.50 4.98 4.91 6.76 6.76 4.06 9.92 1.79 288
2 2.92 4.25 5.13 2.00 5.78 5.87 8.01 8.01 5.06 11.41 3.52 544
3 4.00 5.59 7.04 2.97 7.42 7.41 10.39 10.39 6.70 14.87 7.98 1348
4 8.00 6.05 8.59 4.01 8.52 8.85 12.22 12.22 7.78 17.52 15.78 2602
  1. 手柄并不是关于中心线对称。表中的尺寸表示最大操作半径。但是对于DN100通径的阀门,其启闭程度必须从显示的位置上旋转180o .
    Handle is not symmetrical about centerline. Dimension shown represents the longest operational radius, but the handle position must be rotated 180o from that shown for the 4" size.
  2. 显示的重量代表聚丙烯螺纹型号。
    Weight shown represents the polypropylene threaded figure.
  3. Cv值是根据基本阀门的放置长度计算出来的(G)。
    Cv values were computed for basic valve laying lengths (G).
  4. 对于任何通径,不提供法兰连接的天然PP材料阀门。
    No flanged figures are offered in any size for natural PP.
不要将本样本中的测试数据用在压缩空气或其它气体上。如果需要关于专用于压缩空气和其它气体的抗龟裂热塑塑料管道系统请参阅Chemtrol Chem-Aire®产品样本。
Do not use or test the products in this catalog with compressed air or other gases. See Chemtrol Chem-Aire® literature for information about shatter-resistant thermoplastic piping systems specifically designed for compressed air and other gases.
首页Home美国尼伯科公司 Nibco IncChemtrol®阀门Chemtrol® Valves >正文Text
下一页Next