The prospect of installing a water heater yourself can be intimidating, but NIBCO Flexible Push connectors ensure a fast and easy option with no solder, crimping, joining material, or special tools needed. Just push connecting tubing into valve, connector, or fitting until it stops. The interlocking design creates a secure connection, and the removal tool easily disconnects any joint - installing up to 95% faster than traditional joining methods. NIBCO Push-to-Connect flexible products are ideal for water heater installations, creating a secure, leak-proof connection you can count on. Follow these instructions to successfully install NIBCO Flexible Push connectors to your water heater.
第一步：准备开始
Step 1: Getting Started
- Before installing Flexible Push connectors, follow your water heater manufacturer's instructions until you are ready to connect the water line.
- Remember: the main water valve, gas, and/or electric supply should be disconnected and shut off.
第二步：将软管与接头连接，并在管子上标注记号
Step 2: Attach hose to nipple and mark tube
- Tighten the threaded end of the Flexible Push connector to the water heater nipple (Water heater nipples may not be included with your water heater).
- Using the flexible hose, determine where to cut the copper water line.
- Mark the tube at least 2” below the push fitting end on the copper tube.
第三步：切割管子
Step 3: Cut tube
- Using your measurement, cut the copper tube water lines square using a tube cutter or fine-toothed saw.
- Water may drain out.
- Deburr the tube inside and out using a half-round file or deburring tool to remove sharp edges, and clean the tube end to remove all dirt, oil and grease.
- If you are using PEX tubing, you will need to use a PEX stiffener.
第四步：插入管子
Step 4: Insert tube
- Mark the tube to indicate the proper tube insertion depth. (Insert to a depth of 7/8” for 1/2” nominal pipe or 1” for a ¾” nominal pipe.)
- Connect the push fitting end of the Flexible Push connector to the clean, undamaged pipe using a twisting motion. Be sure not to straighten too tight or kink Flexible Push Connector hose.
第五步：包扎管子
Step 5: Wrapping Up
- Make sure the tube and fitting are securely connected by checking that the depth mark meets the release collar.
- Repeat the process for the second Flexible Push connector.
- That's all there is to it!
Congratulations on installing your water heater with NIBCO Flexible Push connectors! As you can see, NIBCO Push-to-Connect fittings, valves, and connectors are incredibly easy to use, helping you save time, making installations simple, and backed by a 25-year warranty from a company you can trust. Want more information? Download "The Essential Push-to-Connect Quick Reference Guide" now for free!
想要了解更多？
Want to learn more?
