美国尼伯科NIBCO® Coil-Connect®组件配置阀门与管接头组合装置,用于简化安装和维护。这款阀门组件配置一体式管接头连接端口和多功能接口(用于测试点和排气)。过滤器和排泄阀也是标准配置。
NIBCO® Coil-Connect® Kits are supplied with combination valves and unions for ease of installation and maintenance. Combination valves are provided with integral union connections and multiple tapped ports for PT points and air vents. Strainers and drain valves are also standard.
抗失锌
Dezincification-resistant
通径范围1/2” - 2”( 类似于DN15至DN50),配置3个钻孔和功能接口
1/2” - 2” with 3 drilled and tapped bosses
单个管接头连接端口结构
Single union end design
工厂预装测试点
PT point factory installed
工厂预装排泄阀
Drain valve factory installed
通径范围:1/2”至2”(类似于DN15至DN50)
Size range: 1/2” to 2”
通径范围:1/2”至2”(类似于DN15至DN50)
Size range: 1/2” to 2”
通径范围:1/2”至2”(类似于DN15至DN50)
Size range: 1/2” to 2”
球阀组件 - 焊接端口,配置管接头,测试点和排泄阀
Combination Ball Valve - Solder Ends, w/Union, Test Point & Drain Valve
通径范围:1/2”至2”(类似于DN15至DN50)
Size range: 1/2” to 2”
通径范围:1/2”至2”(类似于DN15至DN50)
Size range: 1/2” to 2”
球阀组件 - 螺纹端口,配置管接头,测试点和排泄阀
Combination Ball Valve - Threaded Ends, w/Union, Test Point & Drain Valve
通径范围:1/2”至2”(类似于DN15至DN50)
Size range: 1/2” to 2”