型号：B-68616.99
Model Number: B-68616.99
24" W x 36" D (61 x 91cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304 stainless steel plate, 2" W x 3 1⁄8" H (50 x 80mm), with screw holes for concealed anchors. Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.
附件
Accessories
251-4 Winglt™扶手固定件 251-4 WingItTM Grab Bar Fastener
for 2 1/2" and 3 1/2" (65 and 90mm) or deeper hollow walls with finished wall surfaces 1/4" to 1 1/2" (6 to 38mm) thick. Corrosion resistant stainless steel. One required for each flange. Fastener will support 300 lbs (136 kg) load. WingItTM is a trademark of WingIt innovations, LLC.
2521-30 Optional Mounting Kit
Mounting Kit - 3 Stainless Steel 3 1/2" Round-Head Machine Screws and Toggle Nuts - One Required for Each Flange
2522-30 Optional Mounting Kit
Mounting Kit - 3 Stainless Steel Round-Head Machine Screws and Expansion Shields - One Required for Each Flange
252-30 备选安装组件 252-30 Optional Mounting Kit
Mounting Kit - 3 Round-Head Sheet-Metal Screws - One Required for Each Flange
2583 Optional Anchor Device
Anchor for Installation of Individual Grab Bar Through 3/4" to 1" Thick Toilet Compartment Panel - One Required for Each Flange
2586 Optional Anchor Device
Mounting Kit - 3 Round-Head Sheet-Metal Screws - One Required for Each Flange
B-58616
B-68137.99